Kenwood DDX7032M - Manual (Page 76)

76 DNX7320/DDX7032/DDX7032M
Registering Bluetooth Unit
Registers the Bluetooth unit to be connected.
1 Display the Connect Device List screen
2 Search for a Bluetooth unit
3
1 2
4
5
1 Displays the registered Bluetooth unit.
Displays the busy service in blue. Displays
the available service in gray.
2 Scrolls the name of the Bluetooth unit.
3 Searches for Bluetooth unit.
4 Registers Bluetooth unit that cannot be
registered by normal register (paring)
operation.
5 Returns to the previous screen.
⁄
• A new device cannot be registered if there are 5
registered Bluetooth units. Delete unnecessary
registration. See <Deleting Bluetooth Unit> (page 78).
3 Select the Bluetooth unit to register
10
10
8
7
9
11
6
6 Displays the searched Bluetooth unit.
7 Scrolls the name of the Bluetooth unit.
8 Cancels searching of Bluetooth unit.
9 Starts search.
p Scrolls.
q Returns to the previous screen.
4 Enter PIN code
Enter the PIN code specified for the Bluetooth
unit to register.
15
13
12
14
w Enters a code number.
e Cancels registration of PIN code.
r Enters PIN code.
t Clears the code number.
⁄
• You can also register from the Bluetooth unit side. For
the PIN code necessary for registration, see <Registering
Bluetooth Unit PIN Code> (page 77).
• If the error message appears even though the PIN code
is correct, try <Registering Special Bluetooth Unit> (page
77).
Setup Menu