English, Driving instructions – KTM 50 SX JUNIOR User Manual

Page 12

Advertising
background image

ENGLISH

11

DRIVING INSTRUCTIONS

»

What you should check before each start

When you start off, the motorcycle must be in a perfect technical condition.

For safety reasons, you should make it a habit to perform an overall check of

your motorcycle before each start.

The following checks should be performed:

1 CHECK TRANSMISSION OIL LEVEL

A lack of gear oil leads to premature wear and finally results in destruc-

tion of the gear wheels.

2 FUEL

Check that there is sufficient fuel in the tank; when closing the filler cap,

check that the tank venting hose is free of kinks.

3 COOLING

FLUID

Check the level of cooling fluid when the engine is cold.

4 CHAIN

A loose chain was fall off the chain wheels; an extremely worn chain may

tear, and insufficient lubrication may result in unnecessary wear of the

chain and chain wheels.

5 TIRES

Check for damaged tires. Tires showing cuts or dents must be replaced.

Also check the air pressure. Insufficient tread and incorrect air pressure

deteriorate the driving performance.

6 BRAKES

Check for proper functioning, check brake fluid level in the tank. The

tank is designed such that it does not need to be refilled, even if the

brake shoes are worn. If the brake fluid falls below the minimum level,

the brake system is either leaking or the brake shoes are completely worn

out. Have the brake system checked at a KTM workshop to avoid brake

failure. Also have the condition of the brake hose and the brake lining

thickness checked.

Check the play of the hand brake lever and foot brake lever.

7 THROTTLE

CABLE

Check the throttle cable for proper adjustment and smooth operation.

Advertising