Kodak EasyShare - Manual (Page 54)

48 www.kodak.com/go/support
6
Troubleshooting
Camera problems
Status Solution
Camera does not
turn on ■ Make sure the battery is charged and installed correctly (see
page 1 ).
■ Turn the camera off, then on again.
Camera does not turn
off
Camera buttons and
controls do not
function
In Review, a blue or
black screen is
displayed instead of
a picture ■ Transfer all pictures to the computer (see page 43 ).
■ Take another picture. If the problem continues, change the image
storage location to internal memory. (
see page 33 .)
Pictures remaining
number does not
decrease after taking a
picture ■ Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
Flash does not fire ■ Check the flash setting, and change as needed (see page 9 ).
NOTE: The flash does not fire in all modes.
Memory card is almost
or entirely full ■ Transfer the pictures to the computer (see page 43 ).
■ Delete pictures from the card or insert a new card.
■ Change the image storage location to internal memory ( see
page 33 ).