Kenwood KVT-745DVD - Manual (Page 9)

English 9
When using the bracket shown above, you cannot use screws at two holes of the right and left unit sides. If so, tighten
the bracket using accessories
0 as shown below.
■ Installation on Toyota Car using Brackets at Holes shown by "¶"
1. Use accessories 0 at both sides as shown.
Accessory 0
2. Mount the bracket at each side.
Accessory -
Accessory -
Screws (included in
audio unit package)
Screws (included in
audio unit package)
Audio unit or others
Accessory 0
Bracket
or
3. Bend each end of accessory 0 to fix the bracket.
Use a flat-blade screwdriver or pliers, and
bend each accessory tab into the hole of
installation bracket to fix the bracket.