Kenwood KAC-X4R - Manual (Page 7)

English 7
Status Information Display and Settings
Displays the operating voltage, current consumption and internal temperature.
Additionally, changes the units for temperature or turns ON/OFF the demonstration.
Display type
Control knob
DISP switch
1 Slide the DISP switch towards INFO.
“INFO” appears on the display for 1 second.
2 Turn the control knob to change the display type in the following order.
Display Information / Function
“VOLT” Displays the operating voltage (V).
“CURRT” Displays the current consumption (A).
“TEMP” Displays the internal temperature (°C / °F).
“DEMO” Sets demonstration display ON / OFF.
NOTE
• Temperatures lower than -22°F or -30°C are displayed as “-22F” or “-30C” respectively.
• Displayed information may differ from actual conditions.
Changing the units for temperature
Select °F (Fahrenheit) or °C (Celsius).
1 Turn the control knob, display “TEMP” and push the
control knob.
2 Turn the control knob, display “---F” (Fahrenheit) or “---C”
(Celsius) and push the control knob.
NOTE
The default setting is “---F” (Fahrenheit).
Turning DEMO ON/OFF
Turn the demonstration function ON to display “VOLT”, “CURRT” and
“TEMP” information. The demonstration display changes every five
seconds.
1 Turn the control knob, display “DEMO” and push the
control knob.
2 Turn the control knob, display “ON” or “OFF” and push the
control knob.
NOTE
The default setting is “OFF”.