Kodak Pulse S710 - Manual (Page 10)

4 www.kodak.com/go/support
Getting started
2 Touch your network.
If your router supports Wi-Fi Protected Setup (WPS),
see
page 6 .
If your network is secure, when prompted,
choose your Wi-Fi security type, then enter the
security code for your network using the on-screen
keyboard:
NOTE: Security codes are case-sensitive.
■ Touch to switch between upper and lower
case characters.
■ Touch to enter numbers and special
characters.
■ When finished, touch OK.
If you do not know your security type or security
code, ask the person who set up your network.
The frame scans for your wireless network. A message
appears when it has successfully connected.