Kodak NOVAJET 700 User Manual
Novajet
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- General Description
- Theory of Operation
- Maintenance
- Introduction
- Scheduled Maintenance
- Servo Motor Winding Resistance Check
- Stepper Motor Winding Resistance Check
- Power Feed and Take-Up Motor Winding Resistance Check
- Banding: Hardware vs Software
- Alignments/Adjustments
- Diagnostics Menu
- Limited Access Menu
- Firmware Download/Upgrading for the PC
- Firmware Download/Upgrading for the MAC
- Internal Cabling and Signal Flow Diagrams
- Troubleshooting
- Introduction
- No Power
- Initialization Failure
- Media Does Not Move
- Internal ERROR “Carriage Axis Failure”
- Internal ERROR “Encoder Sensor Failure”
- Internal ERROR “Paper Sensor Failure”
- Internal ERROR “Auto-Sensor Failure”
- Internal ERROR “MPCB Failure”
- Unrecognized Cartridges Error
- Image Skews or Moves
- Does Not Print
- Ink Cartridge Misfiring
- Paper Skewing
- Printer Output is Banding (Horizontal)
- Printer Output is Banding (Vertical)
- Printer Output is Banding (Horizontally and Vertically)
- Keypad Locked - Up or Not Functioning Properly
- Noisy Operation
- Line Quality Degraded
- Fan Does Not Power Up
- Media Take-Up Motor Not Operating, Sensor Works
- Media Feed Motor Not Operating, Sensor Works
- Media Feed and Take-Up Motors Not Operating, Both Sensors Working
- Media Feed or Take-Up Sensor(s) Not Operating
- Initialization Troubleshooting (500 Series)
- Initialization Troubleshooting (630/700 Series)
- Introduction
- Assembly\Disassembly
- Introduction
- Remove the Left, Top, and Right Covers
- Install the Left, Top, and Right Covers
- Remove the Keypad and Display
- Install the Keypad, Display, and Display Power Converter
- Remove Extra Memory (SIMM)
- Install Extra Memory (SIMM)
- Remove the MPCB (Main Printed Circuit Board)
- Install the MPCB
- Remove Power Supply, Cooling Fan, and AC Entry Module
- Install the Power Supply, Cooling Fan, and AC Entry Module
- Remove Servo Motor
- Install Servo Motor
- Remove the Ink Delivery System
- Install the Ink Delivery System
- Remove the Carriage Assembly, Carriage Belt, and the Frame Tensioner
- Install the Carriage Assembly, Carriage Belt, and the Frame Tensioner
- Remove the Carriage PCB
- Install the Carriage PCB
- Remove the Paper Sensor or the Encoder Sensor
- Install the Paper Sensor or the Encoder Sensor
- Replacing the Carriage Bushings
- Remove the Service Station
- Install the Service Station
- Remove the Trailing Cable Assembly
- Install the Trailing Cable Assembly
- Remove the Stabilizer Bracket and Encoder Strip
- Install the Stabilizer Bracket and Encoder Strip
- Remove the Y-Arm Assembly, Pinch Rollers, Slide Shaft, and Auto-Load Sensor
- Install the Y-Arm Assembly, Pinch Rollers, Slide Shaft, and Auto-Load Sensor
- Remove the Lower Roller Assembly, Stepper Motor and Vacuum Fan
- Install the Lower Roller Assembly, Stepper Motor and Vacuum Fan
- Remove the Media Take-Up and Feed Sensor Brackets and Sensors
- Install the Media Take-Up and Feed Sensor Brackets and Sensors
- Remove the Media Take-Up and Feed Motors
- Install the Media Take-Up and Feed Motors
- Remove the Media Drying Fans
- Install the Media Drying Fans
- Remove the Thermal Dryer Assembly (NovaJet 750)
- Install the Thermal Dryer Assembly (NovaJet 750)
- Parts List