Making connections, Playing the demo songs, Selecting programs – KORG EASYSTART CX-3 User Manual

Page 2

Advertising
background image

CX3 EasyStart

2

Making connections

1.

Connect the CX-3’s L and R outputs to a stereo monitoring system, or plug in headphones to the headphone jack,

located on the left front edge.

2.

Connect the included OXP-1 expression pedal (or any compatible expression/CV pedal) to the appropriate jack on the
rear panel.

!

You may need to calibrate the CX-3 to recognize the pedal’s minimum and maximum levels. To do so, press the
GLOBAL key, then press key #8

Ä

press the left CURSOR twice: the display reads, “ExpPdlCalibration”; press ENTER

Ä

The display reads, “Set Minimum:”. With your heel back to the floor, press ENTER. The display now reads, “Set

Maximum:”

Ä

Move the pedal all the way forward and press ENTER

Ä

press WRITE/YES and the press GLOBAL to write

your new Global settings

Ä

press WRITE/YES again to confirm, and then press EXIT to exit Global mode.

Playing the Demo Songs

1.

Press GLOBAL, then press key#8

Ä

press WRITE/ENTER. There are nine demos, which will automatically start playing

and will cycle through all of the songs. Sit back and enjoy!

2.

To choose a specific demo song, make your selection with the BANK -/+keys.

3.

To leave demo mode, press the EXIT key.

Selecting Programs:

1.

Select a Bank with the BANK -/+keys. Then select a Program with keys # 1-8. Note: Make sure that UPPER and

LOWER DRAWBAR SELECT are set to “PRESET”.

2.

The Programs in the CX-3 are ‘organ’-ized via Vertical Banking. For instance, pressing key #8, and then cycling through

the Banks, shows off Programs that mimic a tone wheel organ’s “Church” presets.

3.

To select an EX Mode Program, press the EX MODE key, and then select Programs as above. Like in Normal mode,
they are ‘organ’-ized with Vertical Banking!

Normal:

1

2

3

4

5

6

7

8

JazzPerc Comp Rock Gospel R&B JazzPerc2 Rock2 Church

EX Mode:

1

2

3

4

5

6

7

8

Standard Pipe

Organ Attack

Comp

Bright Clean/Perk Combo

EFX

About the “Signature” presets:

When you see initials in front of a sound, it is a Signature preset made by one of the consulting artists who helped
to develop the CX-3. The artists are: AK – Al Kooper, BA – Brian Auger, BC – Bill Champlin, DM – Don Muro,
DS - Derek Sherinian, GP – Greg Phillinganes, LS – Dr. Lonnie Smith, TC – Tom Coster.

Advertising