Kenwood TK-2200 - Manual (Page 36)

28
C
ALLING
A
LERT
Calling alert tones are used to identify yourself to your party
members and inform them that you are about to make a call.
Your dealer can set up your transceiver with 1 of several
different calling alert tones. If each party member uses a
different calling alert tone, it is easy to know who is making
the call
To make a call using the calling alert tone, press and hold the
PTT switch, then press the key programmed as Calling Alert.
• The calling alert tone will transmit for the duration you press the
Calling Alert key.
K
EY
L
OCK
Press and hold the key programmed as Key Lock for
1 second to lock/ unlock the transceiver keys. The following
keys/ functions can still be used when Key Lock is active:
Calling Alert, Key Lock, Monitor, Monitor Momentary, PTT,
Squelch Off, Squelch Off Momentary, and Volume.
• When the transceiver power is turned OFF and then ON again,
the Key Lock function will be cancelled.
S
UPER
L
OCK
Press and hold the key programmed as Super Lock for
4 seconds to lock the transceiver keys. The following keys/
functions can still be used when Super Lock is active: Calling
Alert, Monitor, Monitor Momentary, PTT, Squelch Off, Squelch
Off Momentary, and Volume.
To deactivate Super Lock, with the transceiver power OFF,
press and hold the Scan key for 2 seconds while turning the
transceiver power ON.
• When the LED lights orange, release the Scan key. A
confirmation tone will sound.
TK-2200/3200 E 01-33-10 04.7.16, 1:44 PM 28