Key Digital KD-DA6 - Manual (Page 13)

When using the Digital Audio connection “PCM” or
coaxial audio, make sure that the “Display” device is
capable of decoding this compressed bit stream of
audio information. Most often when using the “PCM”
audio function, the audio will be connected to a
Dolby Digital® capable AV-Receiver or amplifier.
KEY FEATURES for KD-DA6 & KD-CDA12
Enables signal distribution any HDTV or SDTV
Component Video source to Component Cideo HDTV
ready monitors.
KD-DA6 can drive 6 monitors.
KD-CDA12 can drive 12monitors or two independent
sets of 6 monitors.
KD-CDA12 can be configured for 3 modes (2x6, 1x12
terminated, Nx12 loop-through)
Component Video and Left, Right; Digital PCM audio
can be used instead of Left, Right.
RCA connectors for all video and audio inputs and
outputs.
120MHz bandwidth.
KEY BENEFITS for KD-DA6 & KD-CDA12
Drives cable up to 300 feet.
Can be cascaded to another KD-CDA6 or KD-CDA12 to
drive as many outputs as desired from one source.
External power supply.
Crystal clear image.
Page 13
HD View12
OP E R AT ING IN S T R U C T ION S
Model KD-CDA12