Kenwood XD-A900 - Manual (Page 7)

XD-951/A900/A700 (En)
7
Preparation section
Basic section
Application section
Knowledge sections
+ −
+ −
1 1
3 3
Twist
Speaker Unit
FM indoor antenna
The accessory antenna is for temporary indoor use only. For stable
signal reception we recommend using an outdoor antenna. Remove
the indoor antenna if you connect one outdoors.
System connection (XD-951/XD-A900)
Speaker (left)
3 2 1 4
The external view is variable depending on the model and
marketing destination area.
1Strip the coating from the tip of cord and twist the
conductor.
2Connect to the antenna terminal.
3Locate the position providing good reception condition.
4Fix the antenna.
WOOFER
SUPER
WOOFER
SUPER
Before connecting the Front
Speakers
Stick the supplied front speaker cushions
to the bottom of the front speakers to sta-
bilize the speakers and prevent them from
slipping.
1. In case an associated system compo-
nent is connected, also read the instruc-
tion manual of the component.
2. Never short-circuit the + and – speaker
cords.
3. If the left and right speaker connections
or the + and – polarity are inverted, the
sound will be unnatural with unclear
positioning of musical instruments, etc.
Be sure to connect them without mis-
take.
4. Be sure to insert all connection cords
securely. If their connections are imper-
fect, the sound may not be produced or
noise may interfere.
5. Before plugging or unplugging a con-
nection cord, be sure to unplug the
power cord from the wall AC outlet. If
connection cords are plugged or un-
plugged with the power cord left plugged
in, malfunction or damage may result.
Notes Notes
Speaker cushion
Caution regarding placement (Except for U.S.A. and
Canada)
To maintain proper ventilation, be sure to leave a space around
the unit (from the largest outer dimensions including projec-
tions) equal to, or greater than, shown below.
rear panel: 10 cm