Kyocera KYO305 - Manual (Page 6)

3 82-G2028-1EN, Rev. 001
C
HARGING THE
B
ATTERY
The battery must be charged for at least
2 hours prior to use. Once charged, it
provides up to 8 hours talk time and up
to 190 hours standby time.
a. Connect the AC Adapter to
your headset.
b. Plug the AC Adapter into a wall
outlet. The LED Indicator
will illuminate red while charging
and turn off when charging
is complete.
c. Unplug the charger from
your headset.
P
AIRING
Y
OUR
H
EADSET WITH
A
C
ELL
P
HONE
a. Ensure your phone is turned on and
is within 33 feet (10 meters) of
your headset
b. Ensure your headset is turned off.
c. Place your headset in pairing mode
by pressing and holding the
Multi Function button for 8
seconds until the LED Indicator
flashes red and blue.
d. Activate the Bluetooth connection
from your cell phone. Execute the
search function to search for
Bluetooth devices. When the search
completes, a list of supported
devices will be displayed. Consult
your cell phone user guide for
specific instructions.
e. Select KYO305 from the search
results list. When prompted, enter
passkey 0000.
f. When successfully paired, the LED
Indicator will change from flashing
red and blue, to flashing blue only.
g. Your headset is now ready for use.
R
ECONNECTING TO A
C
OMPATIBLE
C
ELL
P
HONE
If your headset is out of the 33ft. (10M)
range for over 10 minutes, reactivate
the connection by pressing the
Multi Function button until the device
powers on, and the connection is
reestablished.