Kathrein Euroline UFE 305/S - Manual (Page 27)

Installation menu
27
Note: Some programmes may not transmit the correct GMT. In this case, the
receiver displays the wrong time of day. To have the correct time of
day displayed again, change to another European programme, and
wait a few minutes until the receiver shows the correct time again.
System informationen
The hardware and software versions of the receiver are displayed.
Reset to the factory settings
This menu is protected with the password '0000'. If you had changed
the receiver programming, and want to reset it to the factory setting,
select this item. Press OK and enter the password. The memory will
be updated after about one minute; turn off the receiver with the power
switch, and turn it on again. Select the desired menu language, and
confirm this language with OK.
Attention: The receiver is reset to the factory setting; all changes you may have
made are lost. The programme list, too, is reset to the factor setting.