Kodak MDV434K - Manual (Page 26)

English
26
DVD Setup Menu Options
TIPS: To return to the previous menu, press
1.
To remove the menu, press SYSTEM MENU .
Audio Setup Menu
1
In disc mode, press SYSTEM MENU.
2
Press
1 2 to select ‘Audio Setup’ icon.
3
Press OK to confirm.
Go to Audio Setup Page
Analog Output
Digital Audio Setup
Sound Mode
Night Mode
- - Audio Setup Page - -
Analog Output
This options allows you to set the stereo
analog output of your DVD Player.
1
In ‘AUDIO SETUP PAGE’, press
3 4 to
highlight {ANALOG OUTPUT}, then
press
2.
Stereo
Select this option when output delivers
sound from only the two front speakers.
LT/RT
Select this option if your DVD Player is
connected to a Dolby Pro Logic decoder.
V SURR
Allows the DVD player to use virtual
surround sound effects.
2
Press
3 4 to select a setting, then press
OK to confirm your selection.
Digital Audio Setup
The options included in Digital Audio
Setup are: ‘Digital Output’ and ‘LPCM
Output’.
1
In ‘AUDIO SETUP PAGE’, press
3 4 to
highlight {DIGITAL AUDIO SETUP}, then
press
2.
2
Press the
3 4 keys to highlight an option.
3
Enter its submenu by pressing
2.
4
Press
3 4 to select a setting, then press
OK to confirm your selection.
Digital Output
Set the Digital output according to your
optional audio equipment connection.
➜
Off: Turn off the digital output.
➜
All: If you have connected your
DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
➜
PCM Only: Only if your receiver is
not capable of decoding multi-channel
audio.
Helpful Hints:
–
If DIGITAL OUTPUT is set to ‘All’, all
audio settings except MUTE are invalid.
01-37 MDV434K_Eng_552 04/02/05, 4:14 PM 26