Remote control function, English 33, Basic source control function – Kenwood VZ907 User Manual
Page 33: Visual function
A
T
T
TUNE
TRACK
MODE
AME
REAR AV
SP
V.SEL
FNC
4
¢
38
FM
+
AM
–
+
–
SRC
TV/VD
M/S
English
33
Remote Control Function
Basic Source Control Function
• SRC button
Each time you press the SRC button, the source mode switches
as follows:
▼
Tuner mode
▼
CD mode (Video CD mode)
▼
Tape mode
▼
TV mode
▼
Standby mode
• The mode switches to the next mode from any mode which
cannot be used.
• The tuner mode, disc changer mode and navigation mode will
differ depending on the unit that is connected.
• VOLUME buttons
Press the
ª
button to increase the volume.
Press the
·
button to decrease the volume.
• ATT button
Turn down the volume quickly. To return the volume to its
original level, press the button again.
NOTE
Visual Function
• V.SEL button
Each time the V.SEL button is pressed, the image video will
switch between the navigation and video.
• MODE button
Each time the MODE button is pressed, the screen mode
switches between the normal, full, just, and zoom.
• FNC button
Press the FNC button to switch the source control screen.
Each time the FNC button is pressed, the back picture in the
source control screen changes.
• REAR AV button
Each time the REAR AV button is pressed, the AV output mode
switches between the normal video 1 and video 2.
VOLUME buttons
ATT button
V.SEL button
MODE button
SRC button
FNC button
REAR AV button