Kawasaki VULCAN 1700 VOYAGER - Manual (Page 3)

z Route the other end of the antenna cable along the chassis
and under the center of fuel tank. Follow the routing of the AM/
FM antenna cable to the rear and into the trunk. Continue to
route the CB antenna cable along the left and rear of the trunk
to the right rear corner. Secure the cable with wire ties.
z Cut the antenna base drilling template out of the instruction
sheet. Carefully fold it at the score lines and tape to the inside
right rear corner of the trunk as shown.
z Carefully mark the center of the holes with a scribe and drill
pilot holes from the inside of the trunk using a 1/16” bit. Finish
drilling the holes from the outside using a 7mm (1/4”) bit.