Kodak EasyShare C310 - Manual (Page 51)

Troubleshooting
www.kodak.com/go/support 45
Ready light blinks red
and camera turns off. Batteries are low or
exhausted. Install new batteries ( page 1 ) or
charge rechargeable batteries.
Ready light glows
steady red. Camera’s internal
memory or card is full. Transfer pictures to the computer
(
page 13 ), delete pictures from the
camera ( page 11 ), switch image
storage locations ( page 24 ), or insert
a card with available memory
(
page 3 ).
Camera processing
memory is full. Wait. Resume picture taking when
the light turns green.
Card is read-only. Change the image storage location
to internal memory (
page 24 ), or use
a different card.
Ready light glows
steady green. Camera is on; ready to
take a picture or video. Camera is operating normally.
Status Cause Solution