Kodak 5500 - Manual (Page 14)

A-61074 April 1997 2-7
To set the internal time and date settings:
•
Select a single field ( month, day, year, hour, or minute) and press
Enter.
The sample window assumes that the month field was selected.
Configuration Items
Display Language
Measurement System
Date Format
Time Format
Set Time and Date
Confirmation Tone Volume
Confirmation Tones
Fixed Field Delimiter
Printer Messages
Load scanner from laptop
Load laptop from scanner
Previous Menu
Setting
English
Inch
1990/10/10
00:00
Soft
Enabled
Period (.)
Set Time and Date
Set Month
Set Day
Set Year
Set Hour
Set Minute
Laptop Time
Previous Menu
Date
10/10/1990
Time
00:04
Enter new month below
10
To Change: Enter Value
To Retain: Press ENTER
DIGITAL SCIENCE Status
READY
To change the value of the time/date field selected:
•
Enter the desired value and press Enter.
Valid input for each field is provided below:
Field Valid settings
Month 1 – 12, representing January through December
Day 1 – 31, representing the day of the month
Year 1990 – 2089
Hour 0 – 23, representing 12:00 AM through 11:00 PM
Minute 0 – 59
NOTE: The valid settings should not vary, regardless of the time
and date formats defined using the configuration items
specified in the
Date Format and Time Format sections. The
settings entered here will, however, be displayed in the
formats defined using configuration items specified in the
Date Format and Time Format sections.
To leave the value of the time/date field selected unchanged:
•
Press Enter.