English, Introduction, Important safeguards – Kenwood KS-708HT User Manual

Page 3: Installation, For your records, Positioning for optimal surround sound, About using speakers near a tv

Advertising
background image

3

EN

ENGLISH

KS-708HT 1214/02-06/EN

Introduction

Thank you for selecting our speakers as part of your high-fidelity system. We at KENWOOD are confident that your choice will bring you

years of rich listening pleasure. Please take the time to read through this booklet carefully. It will help you to obtain the peak performance

for which the speakers were designed.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.

Refer to these model and serial numbers whenever you call upon your KENWOOD dealer for information or service on this product.

Model KS-708HT is composed of the front speakers, center speaker and surround speakers.

KS-708HT Serial number

Important Safeguards

3.

Heat – Do not install the unit near a source of heat, such

as radiators, or under direct sunlight.

4.

Modification – Do not attempt to open or modify the unit,

for this could cause fire hazard or malfunction.

5.

Cleaning – Do not use volatile solvents such as alcohol,

paint thinner, gasoline, or benzine, etc. to clean the cabi-

net. Use a clean dry cloth.

6.

Abnormal smell – If an abnormal smell or smoke is de-

tected, immediately turn the power OFF and unplug the

appliance from the wall outlet. Contact your dealer or near-

est service center.

Caution: Read this item carefully to keep your

safety.

1.

Suffocation – After taking the unit out of the polyethylene

bag, be sure to dispose of the polyethylene bag out of the

reach of children. Otherwise, they may play with the bag,

which could cause hazard of suffocation.

2.

Water and moisture – The appliance should not be used

near water - for example, near a bathtub, washbowl, kitchen

sink, laundry tub, in a wet basement, or near a swimming

pool, etc.

Installation

Positioning For Optimal Surround Sound

This speaker system can provide full Surround sound. To enjoy

the full effect of the Surround sound field, please position the

speakers as described below.

• Place the left and right speakers at each side of your TV.

Angle the speakers towards the listening area to enhance

the stereo effect.

• Place the center speaker on the center between the front

left and right speakers. Tilt the speaker upward or down-

ward so that it is directly facing the listening area.

• Place the surround speakers as high as possible, either

directly to the sides of the listening area or else slightly

behind the listening area. Adjust the angles so that these

speakers are facing directly towards the listeners.

• Place the surround back speaker (option) behind the listining

position, at the same height as the left and right surround

speakers.

Left

speaker

Center

speaker

Right

speaker

Surround speakers

Right

Left

Surround back speaker

(option)

About Using Speakers Near a TV

This speaker include magnetic shielding and can therefore be installed close to a TV set. Note, however, that placing speakers too

close to a TV may in some cases produces distortion in the color reception. In such case, turn on the TV and check that color

reproduction is normal. If color is distorted, turn the TV off for 15 to 30 minutes, then turn it back on and check again. (This allows

the TV’s degaussing circuitry to correct for the magnetic field from the speakers.) If distortion is still present, move the speakers

further from the TV.

Advertising