Keys Fitness Triumph 5.3e Elliptical TRI-5-3E - Manual (Page 9)

Assembly
9
5. Slide the Left Lower Handlebar (6a)
on to the Console Tube (3) and secure it
in place using Washer (46), Nylock Nut
(45), and Nut Cap (44). Next, slide the
Left Upper Handlebar (7a) into the top
of the Left Lower Handlebar (6a) and
fasten in place using two Carriage Bolts
(62), two Washers (63), and two Cap
Nuts (64). Assemble the Connecting
Tube (43) and the Lower Left Handlebar
(6a) using Hex Head Bolt (40), Washer
(36), Nylock Nut (27), and Nut Cap (71).
Repeat step to complete the right side.
Step 1: With the Tension Knob (66) on the lowest resistance
setting number 1, insert the ball end of the tension knob
cable into the spring hook on Tension Cable (68).
Refer to Picture A for Step 1.
Step 2: Take the tension knob cable and pull it up and
between the gap of the bracket on the Tension Cable (68).
Refer to Picture B for Step 2.
You can raise the tension by turning the Tension Knob (66)
clockwise.
Figure 5
Figure 4a
7a
44
64
45
46
63
62
6a
40
36
27
71 43
6b
7b
68
68
66
66