Care and maintenance – Kodak ZM2 User Manual

Page 20

Advertising
background image

14

www.kodak.com/go/support

Appendix

■

Go to

www.kodak.com/go/reach

for information about the presence of substances

included on the candidate list according to article 59(1) of Regulation (EC) No.
1907/2006 (REACH).

■

If using this product in an airplane, observe all instructions of the airline.

■

For more information, go to

www.kodak.com/go/batteries

.

Care and maintenance

■

Before inserting or removing a card, make sure your hands, the camera, and the
card are completely dry.

■

If water has entered the camera, remove the card. Allow all components to air-dry
for at least 24 hours before using the camera.

■

Wipe off dirt or sand from the door seals—debris could compromise the seal and
cause a leak in water.

■

Do not subject the camera to temperatures lower than 0 (32

°

F) or higher than

40

°

C (104

°

F) for an extended time—the integrity of the seals may be

compromised. Wait until camera reaches operating temperatures before using.

■

Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.

■

Service agreements may be available in your country. Contact a dealer of KODAK
Products for more information.

■

For camera disposal or recycling information, contact your local authorities. In the
US, go to the Electronics Industry Alliance Web site at

www.eiae.org

or Kodak at

www.kodak.com/go/support

.

Advertising