Kenwood DPX-MP4100 - Manual (Page 22)

22 | English
Menu system
In Standby mode
Contrast Adjustment
Adjusting the display contrast.
Display and Setting
"CONT 1"
…
"CONT 6" (Original setting)
…
"CONT 11"
In Standby mode
Manual Clock Adjustment
1 Select Clock Adjustment mode
Push the Control knob towards up or down.
Select the "CLK ADJ" display.
2 Enter Clock Adjust mode
Press the Control knob for at least 1 second.
3 Adjust the hours
Push the Control knob towards up or down.
Adjust the minutes
Push the Control knob towards right or left.
4 Exit Clock adjustment mode
Press the [MENU] button.
In Standby mode
Switching preout
Alternating the preout between the rear and
subwoofer. (With the subwoofer the sound outputs
without being effected by fader control.)
Display Setting
"SWPRE R" Rear preout.
"SWPRE SW" Subwoofer preout.
In Standby mode
Opening Demonstration
Setting the Demonstration when Power is turned
ON.
Display Setting
"Open ON" Demonstration is carried out when Power is
turned ON.
"Open OFF" Demonstration is not carried out when Power
is turned ON.
In Standby mode
Built-in Amp Setting
Controlling the built-in amplifier.
Turning OFF this control enhances the preout
quality.
Display Setting
"AMP ON" The built-in amplifier activates.
"AMP OFF" The built-in amplifier deactivates.
In Standby mode
Built-in Auxiliary input Setting
Set the Built-in Auxiliary Input function.
Display Setting
"AUX OFF" When selecting the source there’s no Auxiliary Input.
"AUX ON" When selecting the source there’s Auxiliary Input.
In Standby mode
CD Read Setting
When there is a problem with playing a CD with
special format, this setting plays the CD by force.
Display Setting
"CD READ 1" Play CD and Audio file.
"CD READ 2" Play CD by force.
⁄
• Some music CDs may not play even in the "CD READ 2"
mode.