Kalorik USK FT 32306 - Manual (Page 5)

Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity.
Print only
what is inside the frame.
5 USK FT 32306 - 110127
Assembly page 5/24
Fax +32 2 359 95 50
BEFORE USE
• Remove all packaging from the unit.
• Remove the lid, basket, handle and any accessory form the
appliance.
• Before you use the deep fryer for the first time, we recommend
that you clean the lid, bowl, basket, handle and housing of the
deep fryer with warm soapy water with a soft cloth.
DISASSEMBLING THE DEEP FRYER
• Remove the control panel from the appliance. To do this, gently
pull the control panel upwards until it is released.
• Take the interior bowl with your two hands and pull it up gently.
ASSEMBLING THE DEEP FRYER
• Stand the appliance on a dry horizontal surface.
• Place the bowl back in the housing and push it downwards.
• Replace the control panel and the accessories. To replace the
control panel, firmly slide the control panel downward into the
location grooves on the back of the housing until it is locked.
• NOTE: The appliance will only operate when the control panel is
correctly fitted to the outer jacket.
• Unfold the handle of the basket until it is locked to allow rising the
basket easily.
•
Put the remaining power cord length in the cord storage in the
back of the appliance.
FIRST USE
• When using the appliance for the first time, pour the required
amount of oil in the bowl, making sure that the level is between
the MIN and MAX marks indicated inside the bowl.
• We recommend that you use liquid oil that is suitable for deep
frying. Check the label on the bottle. If you wish to use a solid fat,
cut the fat in small pieces. Plug in the appliance, put the
thermostat on the minimum position and add the fat pieces
slowly. When the fat has melted, set the thermostat to the desired
temperature. Warning: failure to observe this will damage your
deep fryer.