Kompernass KH 1126 - Manual (Page 5)

- 3 -
Attention:
In the event of a malfunction and when cleaning the
appliance, remove the power plug from the wall socket.
Risk of electric shock!
• Loosen jammed slices of bread with a blunt wooden
object (e.g. a wooden spatula or spoon).
Do NOT touch the heater elements.
• Differences in bread sorts, moisture and the thickness
of individual slices influence the browning of the
toast. Therefore the bread for toasting should
be kept in sealed packaging until required.
Operating Elements
q Bread roll holder
w Toaster slots
e Operating button
r Toasting dial
(for infinitely adjustable toasting-time electronics)
t Button for the thaw function
y Button for the warming function
u Stop button for interrupting the toasting process
i Crumb tray
o Bread-roll attachment button
Placing
• Unwrap the power cable from the cable winder
in the underside of the appliance.
• Pass the cable through one of the two cable guide
on the underside of the appliance.
This will prevent jamming during usage.
• Place the toaster on a dry and level surface.
Before taking into use
Then heat the appliance up at least five times at the
maximum setting without the insertion of bread slices.
For details on cleaning the appliance read the section
»Cleaning and Care«.
Please take note:
The operating button
e only engages when the power
cable is connected to a power socket.
With the first usage a slight smell can arise (minimal
smoke development is also possible). This is normal
and dissipates after a short time. Provide for sufficient
ventilation.
Adjusting the browning level
The desired level of browning, from "light" (1) to
"dark" (7) can be adjusted infinitely with the browning
regulator
r of the toasting time electronics.
Take note that, subject to the demand made on
the toaster, the level of browning can vary
somewhat with an unvarying adjustment of the
browning regulator
r ! The less the number of
slices inserted, the higher is the browning level.
Thus, if you are not intending to toast many slices,
always adjust the browning regulator
r a little
lower.
IB_KH1126_E30259_LB6 20.04.2009 16:28 Uhr Seite 3