KORG Synthesizer/Vocoder MICRO - Manual (Page 66)

60
1-2. INIT LEVEL ( )
Initializing CH LEVEL A/B
You can access this function if a vocoder
program is selected.
This will simultaneously initialize the
output levels of the eight band-pass filter
channels for the carrier (SYNTHESIS
FILTER). When you initialize the levels,
all output levels will be set to 127.
Procedure
1 Hold down the SHIFT key and press
the 1 key.
The display will indicate "
."
2 Press the blinking 1 key.
The output levels will be initialized,
and then the microKORG will return to
its normal state.
If you decide to cancel, press the lit
SHIFT
key.
2-2. INIT PAN ( )
Initializing CH PAN A/B
You can access this function if a vocoder
program is selected.
This will simultaneously initialize the pan
of the eight band-pass filter channels for
the carrier (SYNTHESIS FILTER). When
you initialize the pan settings, each filter
channel will be set to Center.
Procedure
1 Hold down the SHIFT key and press
the 2 key.
The display will indicate "
."
2 Press the blinking 2 key.
The pan settings will be initialized, and
then the microKORG will return to its
normal state.
If you decide to cancel, press the lit
SHIFT
key.
1
2
1, 3
Enable ( ):
MIDI control changes will be
transmitted and received.
[3] knob: PITCH BEND
Selects whether pitch bend messages
will be transmitted and received.
Disable (
):
Pitch bend messages will not be
transmitted or received.
Enable (
):
Pitch bend messages will be
transmitted and received.
[4] knob: SYSTEM EXCLUSIVE
Selects whether MIDI system
exclusive messages will be transmit-
ted and received.
Disable (
):
MIDI system exclusive messages will
not be transmitted or received.
Enable (
):
MIDI system exclusive messages will
be transmitted and received.
3 When you have finished making
settings, press the lit 4 key or the
SHIFT
key. The microKORG will
return to its normal state.
4-1. MIDI FILTER ( )
MIDI Filter
These settings specify whether the
corresponding types of MIDI data will be
received and transmitted.
Procedure
1 Hold down the SHIFT key and press
the 4 key.
The display will indicate "
."
2 Turn the appropriate knob 1–4 to make
the desired settings.
[1] knob: PROGRAM CHANGE
Selects whether program changes will
be transmitted and received.
Disable (
):
Program changes will not be transmit-
ted or received.
Enable (
):
Program changes will be transmitted
and received.
[2] knob: CONTROL CHANGE
Selects whether MIDI control changes
will be transmitted and received.
Disable (
):
MIDI control changes will not be
transmitted or received.
1
1, 2
1
1, 2
Initializing CH LEVEL and CH PAN
–VOCODER
MIDI Filter