Kodak Slide Projector - Manual (Page 14)

10 KODAK CAROUSEL® Slide Projector
Operation
Forward and
Reverse Press the forward button on the projector or the remote control to project the
first slide. To change slides, briefly press the forward or reverse buttons.
Focus Focus your first slide using the focus knob on the projector or the focus button
on the remote control (Models 4400 and 5600 only).
Autofocus
(Models 4400 and
5600 only) The autofocus feature automatically focuses each slide after you focus your
first slide manually. If there is a mix of slide mounts in the tray (cardboard,
plastic, and glass), it may be necessary to manually refocus between
mount-type changes. The focus button on the cabled remote can be used for
Models 4400 and 5600.
Random Projection For random projection of any slide in the
tray:
• press and hold down the
select bar ,
• rotate the tray to the desired slide,
and
• release the select bar.