Care and maintenance, Limited warranty, Care and maintenance limited warranty – Kodak ZM1 User Manual
Page 20
14
www.kodak.com/go/support
Appendix
■
If using this product in an airplane, observe all instructions of the airline.
■
For more information, go to
.
Care and maintenance
■
Before inserting or removing a card, make sure your hands, the camera, and the
card are completely dry.
■
If water has entered the camera, remove the card. Allow all components to air-dry
for at least 24 hours before using the camera.
■
Wipe off dirt or sand from the door seals—debris could compromise the seal and
cause a leak in water.
■
Do not subject the camera to temperatures lower than 0 (32
°
F) or higher than
40
°
C (104
°
F) for an extended time—the integrity of the seals may be
compromised. Wait until camera reaches operating temperatures before using.
■
Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
■
Service agreements may be available in your country. Contact a dealer of KODAK
Products for more information.
■
For camera disposal or recycling information, contact your local authorities. In the
US, go to the Electronics Industry Alliance Web site at
or Kodak at
Limited warranty
Kodak warrants its digital cameras and accessories (excluding batteries) to be free
from malfunctions and defects in both materials and workmanship for the warranty
period specified on your KODAK Product packaging. Retain the original dated sales
receipt. Proof of purchase date is required with any request for warranty repair.