KTM 990 - Manual (Page 17)

OPERATION INSTRUMENTS
»
16
5
6
2
1
1
3
4
Combination switch
The rocker switch LIGHTS [1] actuates the high beam or low beam.
= High-beam light
= Low-beam light
The light signal (high beam) is actuated with button [2].
The indicator switch [3] returns to central position after actuation. Press flasher
switch towards switch housing to switch off the flasher.
The horn is sounded with button [4].
Emergency OFF tip switch, starter tip switch
The emergency off switch [5] is provided for emergency situations and should not be used
to switch off the engine.
The engine is ready for operation in position (ignition circuit and starter circuit are
switched on).
The engine cannot be started in position (ignition circuit and starter circuit are inter-
rupted).
Use the starter tip switch [6] to operate the electric starter.