Using custom reheat, Icrowave cooking – KITCHENAID KEMI301G User Manual

Page 17

Advertising
background image

17

continued on next page

M

icrowave Cooking

4. When display says “TIME,”

touch MICRO to set second
cycle.

5. Set cooking time for second

cycle.

Example for 3 minutes, 25 seconds:

TOUCH

MICRO

COOK
POWER

TOUCH

CONTROL

LOCK

3

2

5

6. Set cook power for second

cycle (optional).

If you want to cook at full (100%) cook
power, go to Step 8.

Example for 60% cook power:

7. Repeat Steps 4 to 6 above for

third cycle (optional).

8. Start oven.

One short tone will sound between cycles.

TOUCH

6

MICRO

COOK
POWER

then

NOTES:

If you want to add more time during
cooking use EASY MINUTE. See
“Using EASY MINUTE” in the “Getting
to Know Your Microwave Oven” section
for more information.

During any Micro cooking stage, you

can change the cooking time after
touching START. Simply touch MICRO
and enter the new cooking time within
5 seconds.

When cooking time ends:

Four tones will sound, and the display will
show “End”.

9. After cooking, open the door

OR

Four tones will repeat every minute until
you open the oven door or touch
CANCEL. This will clear the display.

TOUCH

E

ASY

M

INUTE

START

(display counts
down cooking time
in each cycle, start-
ing with first cycle)

TOUCH

MICROWAVE OVEN

CANCEL

Using CUSTOM REHEAT

Your microwave oven automatically reheats
food. You do not have to enter times or tem-
peratures.

NOTE: If you want to manually reheat using
a cook time and cook power see “Reheating
chart” in the “Cooking Guide” section.

Summary of steps for setting
CUSTOM REHEAT

1. Touch CUSTOM REHEAT.
2. Touch CUSTOM REHEAT again to scan

and select reheat food settings.

3. Touch QUANTITY to scan and select

available quantity settings.

4452303v10c103 8/13/98 5:28 PM Page 17

Advertising