Kenwood KDV-7241 - Manual (Page 9)

English | 9
Basic operations —
Control panel
• TUNER: Select the bands.
• DISC: Stop playback.
• On menus: Back.
Select the source.
TUNER
= DISC (DVD/VCD/CD) = AV-IN
=(back to the beginning)
• You cannot select these sources if they are not ready.
Display window
• Eject the disc.
• Change the control
panel tilt (Tilt1 – Tilt4)
[Hold, then press].
* 1 <AV Menu> screens
You can use the menus to set up various settings.
The <AV Menu> screen consists of the following sub-menus—
Setup/Equalizer/Sound/Mode/List.
• For details, see page 29.
* 2 To attach the control panel
* 3 By holding
5 / ∞, you can display the list accessible for the
selected source.
• Turn on the power.
• Turn off the power [Hold].
• Attenuate the sound (if the
power is on).
Change the display information.
4 / ¢
• TUNER: Search for stations/
ensembles.
• DISC: Select chapters/tracks.
• On menus: Go to previous/next
step.
5 / ∞* 3
• TUNER: Select preset.
• DISC: Select titles/folders.
• On menus: Select items.
Activate TA Standby Reception.
Show PTY preset list [Hold].
Remote sensor
Adjust the
volume.
Reset the unit.
• Use only when the internal
system malfunctions.
Display or erase
<AV Menu>*
1 .
• DISC: Start playback.
• On menus: Enter. (
ENT : [Press]/
ENT : [Hold])
Change the aspect ratio.
Detach the control panel* 2 .