KTI Networks KS-2260 - Manual (Page 92)

-92-
3.7.2 TFTP Restore Configuration
----------------------------------------------------
Managed 24+2G Switch :Restore Configuration File
TFTP Server : 192.168.0.15
Remote File Name : data.dat
action-> <Edit> <Save> <Quit>
----------------------------------------------------
The steps to use TFTP to restore switch configuration are:
1. Start your TFTP server and place the image file of new configuration
file on the TFTP server.
2. Use <Edit> command to specify TFTP server and file name:
TFTP Server : Type the IP address of your TFTP server.
Remote File Name : Type the file name of the new configuration
5. Press [Ctrl+A] to go back to action line.
6. Use <Save> command to start downloading the file.
7. When command completed successfully, the image file download
finished too.
8. Use Default command to reboot the switch as follows:
Main Menu
-> Reboot Switch
-> Default