Connections (continued) basic tv connections, Rf coaxial connection, Video connection – Kodak XBS444 User Manual
Page 12: S-video connection, Component video (color stream, Connection, Progressive scan (colorstream, Pro) connection
12
Connections (Continued)
Basic TV Connections
Make one of the following connections, depending on
the capabilities of your existing equipment.
RF coaxial connection
Connect the ANTENNA/CABLE OUT jack on the
DVD+Hi-Fi VCR to the ANTENNA in jack on the TV
using the 75-ohm Coaxial Cable supplied (R).
ote
If you use this connection, tune the TV to the DVD+Hi-
Fi VCR’s RF output channel (CH 3 or 4).
How to set the DVD+Hi-Fi VCR’s RF output channel
1. While the DVD+Hi-Fi VCR is turned off, press and hold
TUNING (
v
/
V
) on the front panel for about five
seconds.
The unit will turn itself on and “RF-03” or “RF-04” appears in
the display window.
2. Use TUNING (
v
/
V
) on the front panel to change the
RF output channel (CH 03 or CH 04).
3. Turn the DVD+Hi-Fi VCR off and then on.
4. Select the TV’s CH to 3 or 4 depending on the RF
output channel you had selected.
Now you can watch the DVD+Hi-Fi VCR playback on
CH3 or CH4 of your TV.
Video connection
Connect the MONITOR OUT jack on the DVD+Hi-Fi
VCR to the VIDEO IN jack on the TV using the video
cable supplied (V).
otes
If you use this connection, set the TV’s source selector to
VIDEO.
S-Video connection
Connect the S-VIDEO OUT jack on the DVD+Hi-Fi VCR
to the S-VIDEO IN jack on the TV using the optional S-
Video cable (S).
Component Video (Color Stream
®
) connection
Connect the COMPONENT VIDEO OUT jacks on the
DVD+Hi-Fi VCR to the corresponding IN jacks on the
TV using a Y Pb Pr cable (C).
Progressive Scan (ColorStream
®
pro) connection
If your television is a high-definition or “digital ready”
television, you may take advantage of the DVD+Hi-Fi
VCR’s progressive scan output for the highest video
resolution possible.
If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the DVD+Hi-Fi VCR.
Connect the COMPONENT VIDEO OUT jacks on the
DVD+Hi-Fi VCR to the corresponding IN jacks on the
TV using an optional Y Pb Pr cable (C).
ote
– Set the Progressive option to “On” in the Setup menu
for a progressive signal, see page 20.
ANTENNA
FM
GND
AM
S-VIDEO OUT
IN
OUT
ANTENNA/CABLE
SPEAKERS
FRONT
(R 4 )
(R 4 )
REAR
CENTER
( 4 )
REAR
(L 4 )
FRONT
(L 4 )
SUB
WOOFER
( 8 )
VIDEO
MONITOR COMPONENT
VIDEO OUT
OUT
VIDEO
Y
Pb
Pr
AUDIO
1
L
R
L
R
AUDIO INPUT
VIDEO
INPUT
ANTENNA
INPUT
V
S
R
Rear of TV
Rear of DVD & Hi-Fi Home Theater System
S-VIDEO
INPUT
Y
Pb
Pr
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
C