Kodak EASYSHARE W820 - Manual (Page 14)

7 www.kodak.com/go/support
Setting up for wireless operation
If your wireless network is not found:
a. Slide to highlight My network not shown, then select OK.
b. Check that your router is on and your frame is close to the router, then select
Scan again.
If your wireless network is still not found, your network does not broadcast SSIDs.
You then need to enter your network SSID (sometimes called the network name)
manually:
a. Select Enter SSID, then tap OK.
The on-screen keyboard appears.
b. Using the on-screen keyboard, enter the SSID in the text box, ( see page 7 ). Tap
Done when finished.
The person who set up your network can help you with this information. Or, tap
Back then tap Help me connect for more information.
2 With your home network highlighted, tap OK to connect to your home network.
The Connecting (or the wireless network security screen, if enabled) appears.
Or, tap Exit to go to the Home screen without connecting. (See page 30 .)
Enter security key (if you have wireless network security enabled)
You are prompted to enter your security key (WEP or WPA) using the on-screen
keyboard. Slide along the bottom of the touch border (or tap below the slider
arrows) to highlight a character, then tap
(Select) to enter it in the text box.
Tap Done when you are finished entering all the characters.