Kodak EASYSHARE W820 - Manual (Page 70)

63 www.kodak.com/go/support
Changing settings and more
Automatically upgrade firmware from the Internet
When the frame is connected to your wireless network, you can automatically
upgrade the firmware from the Internet whenever a new version is available.
For the latest features and best experience with your frame, upgrade your firmware
from the Internet whenever the new firmware upgrade message appears.
For more information about your frame’s new features, explore the EASYSHARE
Digital Display Software on your computer or in Web Media on your frame’s Home
screen (see
page 30 ).
Upgrade right away
■ Install now—Select, then press OK to start the upgrade.
When the upgrade is complete, your frame automatically restarts. If it doesn’t, press the
power switch on the frame to Off, then back to On.
IMPORTANT: Do not turn off the frame during the upgrade!
Upgrade later
■ Remind me later—Select, then press OK.
The upgrade message disappears, then appears again the next time you turn on the
frame.
■ No thanks—Select, then press OK.
The upgrade message disappears. To change your mind and upgrade to this version, see
Manually upgrade firmware, page 62 .
A new message appears when the next firmware version is available.