Kenwood KMF-X9000 - Manual (Page 4)

4 EN
7
2-Channel stereo configuration
This is the ‘standard’ stereo operation mode, with the amplifier driving 2 speakers in stereo (such as the Surround Back Left and
Surround Back Right speakers in a THX Surround EX
® home theater system). The amplifier delivers its rated stereo power output
into each speaker.
1
Make sure that the KMF-X9000’s power cord is unplugged from the wall outlet before making any connections.
2
According to the speakers to be used, set the speaker impedance selector switch as follows:
• For 2 Ω speakers: Set the 2Ω (STEREO)/6Ω OVER switch to 2Ω (STEREO) and 6Ω OVER/2Ω switch to 2Ω.
• For 6-16
Ω speakers: Set the 2Ω (STEREO)/6Ω OVER switch to 6Ω OVER and 6Ω OVER/2Ω switch to 6Ω OVER.
3
Connect the amplifier as shown in the diagram.
CLIP INDICATOR CD 2 / TAPE 2 MONITOR SURROUND BACK 96kfs DISCRETE 6.1 MATRIX 6.1 NEO : 6 PRO LOGIC DTS-ES
* If you connect more than one pair of speakers to the KMF-X9000, move the 2 Ω (STEREO)/6Ω OVER (THX) switch to the 2Ω
(STEREO) position. The amplifier’s performance is not THX ® -certified when the switch is set in the 2
Ω (STEREO) position.
Now you can plug the power cord of this unit into the AC outlet!
CAUTION:
Before reconnecting a speaker cord or switching a selector switch, turn OFF the power and unplug the power
cord to avoid malfunctions or damage to the unit.
Preamplifier
Audio cord (supplied)
To wall AC outlet
Speakers
(2 Ω-16Ω)
* In the case of 2
Ω ON : +12 V
OFF : OPEN (or GND)
NC
GND
KRF-X9995D
For RELAY CONTROL connec-
tion to KRF-X9995D or other
compatible unit, see page 6.
Left
(L SURROUND
BACK)
Right
(R SURROUND
BACK)
In the case of 6
Ω
Stereo mini-plug cord (supplied)
For 12 V RELAY CONTROL, see page 6.