Kenwood MX-5000 - Manual (Page 2)

2 EN
Introduction
Thank you for selecting our power amplifier as part of your high-fidelity
system. We at KENWOOD are confident that your choice will bring
you years of rich listening pleasure. Please take the time to read through
this booklet carefully. It will help you to obtain the peak performance
your power amplifier can deliver.
Features
Lucasfilm THX ® Ultra Certification
THX ® Ultra certification means that the MX-5000 meets Lucasfilm’s
most stringent performance standards. This ensures superb sound
quality and compatibility with other THX
® -certified products.
Operation Modes
The MX-5000 can be used in one of three different operation modes:
2-channel stereo, 2-channel mono, or Mono (bridged, or BTL), so it can
fit into almost any system configuration and deliver all the power your
speakers need.
12 V Relay Power Control
The MX-5000 can be powered on and off by an external 12 volt trigger
signal, so it can be installed in a remote location.
Lucasfilm and THX are registered trademarks of Lucasfilm Ltd.
Unpacking
Contents
Mono (bridged, or BTL) configuration ........................ 5
2-Channel mono configuration ................................... 6
Controls and indicators ................................................ 7
In case of difficulty ......................................................... 7
12 V Relay power control ......................................... 7
Operation to reset .................................................... 7
Troubleshooting ......................................................... 7
Specifications ................................................ Back cover
Before applying power ............................................ 2
Safety precautions .................................................. 2
Unpacking ...................................................................... 2
Installation ...................................................................... 3
Notes on heat generation ......................................... 3
Connections .................................................................... 3
Connections of speaker cords ................................... 3
2-Channel stereo configuration .................................. 4
Unpack the unit carefully and make sure that all accessories
are put aside so they will not be lost.
Examine the unit for any possibility of shipping damage. If your unit
is damaged or fails to operate, notify your dealer immediately. If
your unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company receiv-
ing the unit) can file a claim against the carrier for shipping damage.
We recommend that you retain the original carton and packing ma-
terials for use should you transport or ship the unit in the future.
Accessories
Audio cord (1) Stereo mini-plug cord (1) Speaker terminal cover (1)
Safety precautions
Caution: Read this page carefully to ensure safe operation.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
Before applying power
Caution: Read this page carefully to ensure safe operation.
Units are designed for operation as follows.
U.S.A. and Canada ................... AC 120 V only
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPOR-
TANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER
TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFI-
CIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SER-
VICING TO QUALIFIED SERVICE PERSONNEL. CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN