Kambrook KCT110 - Manual (Page 7)

7
Quick Start Guide
1. Remove Kambrook Electric Teapot
from packaging and assemble. Be
sure to place the basket inside the
Kambrook Electric Teapot.
2. Plug the Kambrook Electric Teapot
into power point and switch on.
NOTE: Ensure that the
Kambrook Electric Teapot
switch is in the ‘OFF’ position.
3. Fill the Kambrook Electric Teapot
with 800ml of water and place
onto base.
4. Place 1 tablespoon of tea leaves
into the basket and place lid
secularly on top of the Teapot,
switch on.
5. When the Teapot has boiled,
leave to settle for approximately
60 seconds.
6. Serve tea.
7. Reheat Kambrook Electric Teapot
if required by switching the switch
to the ‘ON’ position.
KCT110_IB_FA.indd 7 6/11/09 1:26 PM