Kompernass KH 1 - Manual (Page 6)

5
The operating panel
Figure D:
ቢ Buttons and LEDs for the
number of cups
ባ Button for setting the “Hours” (h)
ቤ Clock
ብ Button for setting the “Minutes”
(min)
ቦ Auto. button and LED
ቧ Program button
ቨ Switching off and clearing settings
(off)
Installation and connection
➪
Always place the coffee machine
on a flat, even surface.
➪
When you want to connect up the
coffee machine, pull out the power
cord from its holder (Figure B).
➪
Plug in the power cord.
Before initial use
➪
Open the glass jug (Figure A;
ቨ +
ቩ) and the water container.
➪
Carefully rinse out the water contai-
ner and glass jug with tap water.
➪
Fill the glass jug with 1.4 litres of
tap water.
➪
Empty the jug into the water con-
tainer.
➪
Place the empty glass jug on the
hot plate (Figure A;
ቧ).
➪
Select the required number of cups
“2-4”.
The corresponding LED illuminates and
the brewing process begins.
➪
When the brewing process has
finished, empty the glass jug.
➪
Press the “off” button
(Figure D;
ቨ), until the LED for the
number of cups extinguishes.
You can now use your coffee machine.
Setting the time
➪
Press the “h” and “min” buttons
repeatedly
(Figure D;
ባ‚ until ብ), you reach
the desired time.
➪
Now briefly press the “prog” button
(Figure D;
ቧ).
The two vertical dots in the display
flash. The clock is working.
Preparing the coffee
When configuring all settings on the
control panel (Figure A;
ቦ) apart from
setting the clock and programming the
machine to start brewing, you will hear
a beep when you have correctly pres-
sed a button. At the end of the
brewing process, a LED flashes and
you will hear four beeps. Do not remo-
ve the jug until the beeps finish.
Filling with ground coffee
➪
Push the filter holder release
(Figure C).
The filter holder swivels out to the side
(Figure C).
➪
Place an opened, size 4 filter into
the filter holder.
➪
Pour ground coffee into the filter bag.
KH1_IB_Content_UK.qxd 26.10.2004 8:43 Uhr Seite 5