Kyocera Mita FS-8000CD - Manual (Page 11)

9
Print overrun
†
Press GO
The print job transferred to the printer was
too complex to print on a page. Press the
GO key to resume printing. (The page
may break in some pages.).
You can abandon printing by the CANCEL
key.
If Auto Continue is set to On, printing will
be automatically resumed after a preset
period of time.
RAM disk error ##
Press GO
A RAM disk error has occurred. Look at
the error code given in place of ## and
refer to the printer’s operation guide. To
ignore the RAM disk error, press the GO
key.
Remove paper
option tray ##
Paper remains in optional sorter tray 1 to
9 as displayed in place of ##. Remove
paper sheets.
Replace toner
Clean printer
Replace toner
TK-82 #######
Two message items are displayed alter-
nately. Toner has run out in the toner con-
tainer(s). Replace the toner container
using a new toner kit for the particular
color. The printer does not operate when
this message is displayed.
For example, if Replace toner C,K is
displayed, replace the cyan and the black
toner containers.
Set paper
Press GO
The MP tray is out of paper. Load paper
and press the GO key.
Side cover
open
Open the side cover, then close tightly.
Message Corrective Action
FS8000QR.book Page 9 Tuesday, December 25, 2001 10:47 AM