Kodak i100 Series - Manual (Page 15)

A-61517 October 2004 2-8
Single output
color only simplex This job stream is available for all i100 Series Scanners.
1. Prepare documents.
2. Start the scanner to do color scanning.
3. Setup the scanner to retrieve color images.
4. Enable the scanner and start polling.
Loop
Read front color image header
Read front color image
End loop
Single output
grayscale only simplex This job stream is available for all i100 Series Scanners.
1. Prepare documents.
2. Start the scanner to do grayscale scanning.
3. Setup the scanner to retrieve grayscale images.
4. Enable the scanner and start polling.
Loop
Read front grayscale image header
Read front grayscale image
End loop
Simultaneous output
bi-tonal and color simplex This job stream is available for all i100 Series Scanners.
1. Prepare documents.
2. Start the scanner to do simultaneous output scanning by
selecting front bi-tonal and front color.
3. Setup the scanner to retrieve bi-tonal images first.
4. Enable the scanner and start polling.
Loop
Read front bi-tonal image header
Read front bi-tonal image
Read front color image header
Read front color image
End loop