Kodak DC200 - Manual (Page 30)

3-4
Slide Show
The slide show feature on the DC200/DC210 allows you to connect the camera to
a TV and view the pictures from the memory card on your TV! This is especially
useful when sharing pictures with family and friends.
☞
The camera’s LCD is disabled when the camera is attached to the
video cable.
To view pictures on a TV:
To cancel Slide Show: press the DO-IT button to stop the slide show. The slide
show stops and the main Review screen reappears.
1 Turn your TV and the DC200/DC210
camera off.
2 Insert the video output cable into the video out
connection on the side of your camera.
3 Connect the other end of the cable to the video in
connection on your TV.
4 Turn on the camera and TV.
5 Set the Mode dial to Review.
6 Set the TV to the correct video setting.
The pictures that are stored on the memory card
appear on the TV screen.
☞
You may need to adjust the Video Out
preference on the camera. See “Video out”
on page 4-11 for details.
7 Press a button on the camera to scroll
through the pictures on the TV.
☞
To run a slide show, press the DO-IT
button. The slide show starts, and the
pictures change every five seconds for a
period of five minutes. If you are using an
AC adapter, the slide show
runs indefinitely.
/
Chap1newBook Page 4 Friday, February 5, 1999 7:02 AM