Kenwood KAC-528 - Manual (Page 7)

7
POWER IN
BATT P.CON(REMOTE)
GND
LEFT
BRIDGED
RIGHT
SPEAKER OUTPUT
POWER AMPLIFIER
LE FT
BRIDGED
RIG
HT
■ Speakers cable connection
(Stereo Connections)
Left
speaker
Right
speaker
(Bridged Connections)
Lead terminal
(Commercially available parts)
Left output Right output
POWER IN
BATT P.CON(REMOTE)
GND
LEFT
BRIDGED
RIGHT
SPEAKER OUTPUT
POWER AMPLIFIER
LE FT
BRIDGED
RIG
HT
Lead terminal
(Commercially available parts)
Examples:
■ Speaker Selection
• The rated input power of the speakers that are going to be connected should be greater than
the maximum output power (in Watts) of the amplifier. Use of speakers having input power
ratings that are less than the output power of the amplifier will cause smoke to be emitted as
well as damage.
• The impedance of the speakers that are going to be connected should be 2
Ω
or greater (for
stereo connections), or 4
Ω
or greater (for bridged connections). When more than one set of
speakers are going to be used, calculate the combined impedance of the speakers and then
connect suitable speakers to the amplifier.
Model Stereo Connections (4
Ω
) Bridged Connections (4
Ω
)
KAC-728 200 W or greater 600 W or greater
KAC-628 100 W or greater 300 W or greater
KAC-528 70 W or greater 200 W or greater
200W
(4
Ω
)
4
Ω
200W
(4
Ω
)
200W
(4
Ω
)
200W
(4
Ω
)
4
Ω 4
Ω
200W
(2
Ω
) 100W
(8
Ω
)
100W
(8
Ω
)
200W
(2
Ω
)
Maximum output of
the amplifier
Combined
impedance
Rated input power and
impedance of the speakers