Kyocera BLADE 82-K5483-1EN - Manual (Page 111)

User Guide for the Kyocera Blade phone 83
Setting the phone to receive data or faxes
Your phone may be able to receive certain data or faxes, depending on the
system sending the information. To receive data or faxes, you must connect
the phone to a laptop or PC and switch the phone from voice mode to data/
fax mode.
Note: To purchase a cable, contact your service provider, call (800) 349-4188
(U.S.A. only) or (858) 882-1410, or visit www.kyocera-wireless.com/store .
1. Connect the phone to the laptop or PC. (See page 82.)
2. Set the Com Speed.
3. Select Menu
→
Settings
→
Network
→
Data/Fax Calls .
4. Press to select an option:
– Voice only— Allow only voice calls.
– Fax, next call or Data, next call— Set the phone to fax mode or data
mode for the next incoming call or the next 10 minutes.
– Fax, until off or Data, until off— Force the phone into fax mode or data
mode until the phone is turned off.
Note: You cannot receive voice calls while the phone is in data/fax mode.