Kenwood KB-IR1 - Manual (Page 2)

IMPORTANT NOTES A
1: Press the MODE key.
The display flashes:
TITLE INPUT
2: Press the SET
D--- T--
disc number
DXXX
A. Open the loading door and leave
it open for this entire operation
B. Select an empty disc slot
C. Insert a CD in the empty slot. Make sure
the label faces towards your right.
NAMING DISCS AND TRACKS D. Enter the Disc Name
All models:
• Instead of the SHIFT key, use
the CHARACTER / P . MODE key to
shift between capital letters,
lowercase letters and num-
bers/symbols.
• Use the SHIFT key to select
the secondary symbols on
the number and symbol
keys.
• Use the
enter sp
• If you m
the CURS
keys to h
rect char
DELETE ke
1. Press the DISK SEL .
key.
2. Use the number
keys to enter the
disc number.
3. Press the SET key.
4. The disc tray will
spin around until
the disc slot you’ve selected is
in the open loading doorway.
For other ways to select a disc slot, refer to the changer’s instruction manual.
Discs can be given names (up to 25 characters). On the CD-3280M,
CD-3260M, CD-2280M and CD-2260M, up to 20 tracks per disc can
also be named (up to 15 characters each).
Although the most convenient time to enter disc and track names is
when you insert the discs into the player for the first time, (that way
the player keeps track of the disc names for you as you insert the
discs), you can use this procedure to enter or change disc and track
names any time you want.
These instructions explain how to enter disc names when you insert
the discs into the player for the first time.