Care and maintenance – Kodak CD913 User Manual
Page 54
48
www.kodak.com/go/support
Appendix
Communication with computer—USB 2.0 Full Speed (PIMA 15740 protocol), via
USB cable model U-8, EasyShare camera dock or printer dock
PictBridge support—Yes
Self Timer—2 seconds, 10 seconds, or 2-shot
White balance—Auto, Daylight, Tungsten, Fluorescent, Open Shade
Auto power off—Selectable 1, 3, 5, 10 minutes
Microphone—Yes (for audio recording at Video mode)
Color modes—Color, Black & White, Sepia
Tripod mount—1/4 inch
Operating temperature—32–104
°
F (0–40
°
C)
Size—91.1 mm (3.6 in.) x 62.2 mm (2.4 in.) x 25.3 mm (1.0 in.) @ power off
Weight—137 g (4.8 oz) without battery or card
Care and maintenance
■
If you suspect water has gotten inside the camera, remove the battery and card.
Allow all components to air-dry for at least 24 hours before using the camera.
■
Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
■
Service agreements may be available in your country. Contact a dealer of Kodak
products for more information.
■
For digital camera disposal or recycling information, contact your local authorities.
In the US, visit the Electronics Industry Alliance Web site at
or the
Kodak Web site at
,
.