Konica Minolta Dimage A1 - Manual (Page 39)

/
39
DISPLAY MODE SWITCH
Auto display - the camera will automatically change between
displaying the live image in the EVF or on the LCD monitor. The
EVF’s eye sensors monitor if the EVF is being used and switches
the display location accordingly.
EVF display - the live image will only be displayed in the electronic viewfinder.
Under bright light, the image is easier to see in the EVF than on the LCD
monitor.
LCD monitor display - the live image will only be displayed on the LCD
monitor.
Located on the back of the camera, the display-mode switch
controls which monitor is active. The three position switch allows
the choice between automatic display and setting the display to the
EVF or LCD monitor.
If battery power is a concern, have the grip and eye sensors activate the EVF when in
use, but not the LCD monitor. The auto-display function can be changed in section 1 of
the setup menu (p. 135).