Kyocera Topaz 901 - Manual (Page 7)

User Guide for the Kyocera Topaz Phone 1
1 G
ETTING
S
TARTED
Installing the battery
Your phone comes with a removable lithium ion
(LiIon) battery. Hold the phone with the back
facing you.
1. Open the battery
door by pushing
down on the
indentations located
at the top of the
battery door.
2. Place the battery in
the phone casing
with the metal
contacts toward the
bottom of
the phone.
3. Place the battery
door tabs in the openings on the side of the
phone.
4. Slide the battery door
forward until it snaps
into place.
Charging the battery
You must have at least a partial charge in the
battery to make or receive calls. Fully charge the
battery before using the phone.
To charge the battery,
connect the AC adapter
to the jack on the bottom
of the phone, then plug
the adapter into a wall
outlet.
The battery icon in the
upper-right corner of the screen tells you whether
the phone is:
• Charging (the icon is animated)
• Partially charged
• Fully charged
Recharging the battery
You can safely recharge the battery at any time,
even if it has a partial charge.