Additional care and maintenance, Replacing the remote control battery, W battery – Kodak EasyShare P750 User Manual

Page 40

Advertising
background image

34

www.kodak.com/go/support

Appendix

■

Remove the battery when the product is stored for an extended period of time. In
the unlikely event that battery fluid leaks inside the product, contact Kodak
customer support.

■

In the unlikely event that battery fluid leaks onto your skin, wash immediately with
water and contact your local health provider. For additional health-related
information, contact your local Kodak customer support.

■

Dispose of batteries according to local and national regulations. Go to

www.kodak.com/go/kes.

Additional care and maintenance

■

Always disconnect the power before cleaning. Do not use water, cleaning
solutions, or other adhesives on the frame or any of its parts. Gently wipe the
frame and screen with a clean, dry, lint-free cloth. For fingerprints on the frame,
apply light pressure.

■

Service agreements are available in some countries. Contact a dealer of KODAK
Products for more information.

■

For digital frame disposal or recycling information, contact your local authorities. In
the US, visit the Electronics Industry Alliance at

www.eiae.org

or visit

www.kodak.com/go/digitalframesupport

.

Replacing the remote control battery

Replace the battery with a lithium coin-type CR2015 battery, Kodak part number
4H7032. For proper disposal, go to

www.kodak.com/go/kes.

Remove the battery cover. Remove the
old battery.
Place the new battery in the
compartment with the contact side
down, printing and + sign up.
Replace the battery cover. Insert tabs
and press the cover down until it clicks
into place.

1

2

3

1

2

3

Advertising
This manual is related to the following products: