Konica Minolta BIZHUB C253 - Manual (Page 16)

Fax Driver 2-5
Installing the fax driver 2
3
Click the [AGREE] button if you agree with all terms and conditions of the license agreement.
– If you do not agree with the terms and conditions of the license agreement, the software cannot be
installed.
– You can change the display language of the installer box in the lower-left corner.
– You can change the display language of the installation license agreement in the lower-right corner.
4
When the setup selection dialog box appears, click the [Install printers/MFPs] button, and then click the
[Next] button.
The connected printers and copiers are detected.
– If the printer is not detected, turn the main power off, then on again.
When the turning the power off, then on again, wait at least 10 seconds before turning the power
on again; otherwise, this machine may not function properly.
5
Select this machine, and then click the [Next] button.
– If the connection of this machine cannot be recognized, the machine will not be listed. When this
occurs, select "Specify the Printer/MFP Except for the Above. (IP Address, Host Name)", and then
specify this machine directly.
– In addition to "Normal Printing" (Port9100, USB), "Internet Printing" (IPP) or "Secure Printing" (IPPS)
can also be selected as the connecting method. Secure Print (IPPS) can be used when SSL is
enabled from Web Connection and IPP is enabled.
– When using Windows Vista, the IPPS connection can not be setup using the installer. For using IPPS
connection, setup the connection using the Add Printer Wizard. For details, refer to
"Installing the
fax driver using the Add Printer Wizard" on page 2-7 .