KORG ELECTRIBER ER-1 - Manual (Page 11)

11
2.Parts
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2.Parts
4. Pattern Set key
By holding down this key and pressing one of the step keys, you can switch to the pat-
tern that you registered for that key.
5. Shift key
This key is used in conjunction with other keys. When held down, it gives an additional
function to another key.
Shift + Play/Pause key: Playback from the beginning of the pattern.
Shift + Rec key: During playback, erase triggers from the pattern.
Shift + Part keys: Select a part without sounding it.
Shift + Step keys: Execute the function shown below each step key.
Shift + dial: If the Shift key is held down as you rotate the dial, the value in the
display will change in steps of ten.
Shift + pattern set key: The Pattern Set function will be held (maintained).
For other Shift key combinations, refer to the explanation of each parameter.
Connector section
1 2 3 4 5 6 7
1. Power switch
This switch turns the power on/off. Each time you press it, the power will alternate on
or off.
2. DC 9V
Connect the included AC adapter here.
3. Adapter cable holder
Hook the adapter cable around this so that it will not be disconnected accidentally.
4. MIDI connectors
IN MIDI data is received at this connector to control the ER-1 from an external
MIDI device or to receive a data dump.
OUT MIDI data is transmitted from this connector to control an external MIDI de
vice or to transmit a data dump.
THRU MIDI data received at the MIDI IN connector is re-transmitted without change
from this connector. This is used to "daisy-chain" multiple MIDI devices.
5. AUDIO IN 1, 2 jacks
These jacks are used for the audio-in parts. Sound that is input here can be used as the
sound of the AUDIO IN 1 and 2 part selector keys.
6. L/MONO, R (line output) jacks
Connect your audio cables from these jacks to your mixer or powered monitor system
(powered speakers) etc. If you wish to make monaural connections, connect the L/MONO
jack.
7. (headphone jack)
A set of stereo headphones fitted with a stereo jack plug can be connected here.